Description
MODEL NUMBER
PKW
Description
Copper Piping Kit for Mini Split Installation
Diameter Selection Guide (FOR WYS SERIES)
| 9,000 BTU Models (except for 22 SEER 115V) |
1/4″-3/8″ |
| 12,000-18,000 BTU Models (as well as 9k 22 SEER 115V) |
1/4″-1/2″ |
| 24,000 BTU and Above Models |
3/8″-5/8″ |
Diameter Selection Guide (FOR DIAMANTE/WYT-19 SERIES)
| 9,000 BTU – 18,000 BTU |
1/4″-3/8″ |
| 24,000 BTU |
1/4″-1/2″ |
| 36,000 BTU |
1/4″-5/8″ |
Diameter Selection Guide (FOR DIAMANTE ULTRA/WYT-22 SERIES)
| 9,000 BTU – 12,000 BTU |
1/4″-3/8″ |
| 18,000 BTU |
1/4″-1/2″ |
| 24,000 BTU |
1/4″-5/8″ |
Summary
- Copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
Feature Set
- Highest Quality Full Copper Piping Kit Set.
- Compliance with ASTM-B280 Standard (USA-Canada).
- Dehydrated Soft Drawn Copper Tubes.
- Three Layer Water Proof P.E. Insulation.
- Brass Flare Nuts, on ready formed flare ends.
- Matching Length 16 Gauge 4 Lead Signal Cable set.
- Plastic dust caps, to keep clean during installation.
- Wall Sleeve/Liner with Cap.
- Wall Filler Putty.
- Non Adhesive Wrapping Tape.
Only logged in customers who have purchased this product may leave a review.
MinisplitMart –
Be the first to leave a review.